Offset upper control arm bushings designed to add more camber and shift the alignment adjustment range. Also offers more wheel to fender clearance since the entire upper control arm assembly is shifted 7mm inboard. Perfect for guys in classes such as NASA TT5 or others, that have to take a points hit when doing offset ball joints or camber arms.

Bushings made of black POM Delrin with 304 Stainless Steel inner sleeves. Bushings and sleeves are designed to be a tight press fit in order to prevent slop build up.

Includes a full set for a pair of front upper control arms, inner sleeves, washers, and set screws.

Note: This only works on the FRONT arms.

Install video:

https://www.youtube.com/watch?v=CwQ3y4ACJo0&ab_channel=DIYGuys